Réseau de stacks QCW
Diodes laser & stacks QCW
Les produits de type QD-Q1yzz-Lx sont des ensembles très compacts de « x » stacks (2 ou plus) composés de 1 à 10 barrettes chacun et assemblés sur une même embase métallique. Ces stacks, distants de quelques centièmes de µm sont alimentés en série. D’autres configurations sont disponibles (3, 4, 5, … stacks).
- Fonctionnement en mode QCW
- Assemblage très compact
- Possibilité d’extension "Multi-Stack" jusqu’à 5 stacks
- Longueurs d’onde : 795–830 nm, 880 nm et 9xx nm
- Assemblage à faible résistance thermique
- Qualifié en environnements très difficiles de type spatial (chocs, vibrations,...)
- Spécifications
- Présentation
- Téléchargements
- Applications
- Garantie
- Accessoires
Paramètres | QD-Qxyzz-L2 |
---|---|
Nombre de barrettes (zz =) | jusqu'à 6 fois 12 bars |
Pas entre les barrettes (µm) | 330 à 1000 |
Surface d'émission (mm²) | suivant le besoin |
Puissance QCW par barrette (W) | jusqu'à 400 |
Courant de fonctionnement (A) @ 100 W / bar |
95 Typ. - 115 max. |
Courant de fonctionnement (A) @ 200 W / bar |
185 Typ. - 215 max. |
Courant de fonctionnement (A) @ 400 W / bar |
370 Typ. - 390 max. |
Tension (Volt) | < 2 / bar |
Efficacité (%) | 58 % @ 808 nm 65 % @ 940/980 nm |
Longueur d'onde (nm) | 790 à 980 |
Largeur spectrale (nm) (FWHM) | 3 |
Divergence (°C) (FWHM) | 8 x 36 |
Spécifications à 25°C
Note :
- Polarisation : mode TM ou TE @ 808 nm, TE @ 9xx nm
- Variation de la longueur d’onde de l’ordre de 0,26 nm/°C
- Tolérance sur la longueur d’onde +/- 3 nm, +/- 1,5 nm sur demande
- Barrette à double ou triple puits quantiques disponibles (ex: 400 W @ 200 A & 4 V)
- Durée de vie > 1,109 d’impulsions @ 200 µs de largeur d’impulsion
- Collimation FAC à partir de 400 µm de pas
- Possibilité de plusieurs longueurs d’onde dans le stack
Valeurs maximales de fonctionnement
Paramètres
QD-Qxyzz-L2 Largeur d'impulsion (µs) 5000 Facteur de forme (%) 3 Tension inverse (Volt) 3 Température de fonctionnement (°C) de - 40 à 85 Température de stockage (°C) de - 55 à 85
Note : Utilisation à une température inférieure au point de rosée nécessite une atmosphère asséchée.
Les produits de type QD-Q1yzz-L2 sont des ensembles très compacts de deux stacks (ou plus) composés de 1 à 10 barrettes chacun et assemblés sur une même embase métallique. Ces stacks, distants de quelques centièmes de µm sont alimentés en série. D’autres configurations sont disponibles (3, 4, 5, … stacks).
Les technologies utilisées et le design conduisent à une très forte efficacité, et à une grande fiabilité opérationnelle. L’assemblage avec des brasures haute température (AuSn), la compacité et la robustesse du design permettent une connexion performante, bien adaptée pour la réalisation de lasers pompés par diodes.
Des assemblages compacts de plusieurs stacks (en technologie entièrement brasée) sur une même embase peuvent être réalisés suivant des plans d’ensemble fournis par le client. Une telle réalisation conduit à améliorer encore la compacité de têtes laser pompées par diodes. Il est possible d’assembler jusqu’à cinq stacks en série.
Ces produits sont bien adaptés pour la réalisation de lasers solides performants utilisés dans les applications en aérospatial, en défense, dans l’industrie et pour le spatial.
Format PDF | Taille |
---|---|
Diodes_Dual QCW Linear Stacked Array {QD-1yzz-L2}.pdf | 984.8 Ko |
- LIDAR
- Remote sensing
- LIF
- LIBS
- Ablation
- Traitement de surface
- Spectroscopie
- Marquage
- Gravure
- Pompage
- PLD
- Réparation de masque sur écran plat
- Détection à distance
- Pointeur
- Désignateur
- Illuminateur
- Télémétrie
- Défense & Sécurité
- etc.
- For a period of one (1) year from the date of delivery as stated in Article 4 hereabove, the Vendor warrants the Products against faulty materials and faulty workmanship except parts and components worn out during the normal use of the Products. During the above mentioned period, the Vendor's obligations shall be limited, at the Vendor's option, to the replacement or repair of the Product recognized as faulty by the Vendor which must be promptly return to the Vendor, carriage paid, together with full details of failure and certified. The repaired or new parts will be delivered free of charge to the place of delivery stated in Article 4.
- The Warranty of the Vendor will apply to the Products which have not been modified by the Buyer or a third party and which have been stored, installed, protected, maintained and used in accordance with the Vendor's specifications and instructions. Such warranty shall not apply in case of normal wear and tear or if the Products have been involved in an accident or subjected to any kind of misuse or detrimental exposure and in case of bad conditions of storage; or
- if the Products have been submitted to abnormal conditions (mechanical, electrical or thermal) during installation or use; or,
- if the defectiveness of the Products has resulted from exceeding the maximum values for usage (temperature limit, maximum voltage, etc...) defined by Vendor, from an incorrect choice of application or from a design made by the Buyer.
- Notwithstanding the foregoing, Vendor gives no warranty whatsoever with regard to experimental, developmental or non-qualified Products.
The foregoing constitutes the whole and sole warranty given by the Vendor and shall be in lieu of any other warranty; in particular, the Vendor does not warrant the suitability or fitness of the Products for a particular purpose, nor that the functions of the Products may be used in any application or combination which the Buyer may choose.