Temperature: + 25°C
QCW pulse width = 200 µs
Repetition rate = 100 Hz

Notes :

• Standard polarisation is TM or TE mode @ 808 nm, TE @ 9xx nnm
• Spectral width is < 3 nm FWHM
• Double or triple quantum well bars available (ex: 400 W @ 200 A & 4 V)
• Standard tolerance on wavelength is +/- 3nm, +/- 1.5 nm on demand
• Specifications are for nominal lifetime > 1. 109 pulses

QD-Qxy01-A1, QD-Qxy01-T and QD-Qxy01-H are conductively cooled single laser diode bars operating at high QCW optical power. Bar length is 10 mm with other lengths available (2, 3, 5 mm). The “x” designates the wavelength window and “y” characterizes the optical power up to 400 W QCW. These products are based on efficient and reliable 1 cm linear bar arrays. The design is optimized to allow high performance temperature control.
 
Operation at high duty cycle and high average optical power is achieved with and “H” package offering low thermal resistance.
An additional Fast-Axis Collimation lens (FAC lens) is available for applications requesting well collimated beams (~8 mrad @ 1/e²).

Both the A1 and T compact and rugged packages ensure simple and easy electrical connection with very low impedance. These features are ideal for high repetition rate systems (designator, photo acoustic applications, etc.).

• Ablation
• Engraving
• Flat panel display
• LIBS
• LIDAR
• LIF
• Surface treatment
• Spectroscopy
• Marking
• Pumping
• PLD
• Remote sensing
• Pointer
• Designator
• Illuminator
• Range finder
• Defense & Security
• etc.

• For a period of one (1) year from the date of delivery as stated in Article 4 hereabove, the Vendor warrants the Products against faulty materials and faulty workmanship except parts and components worn out during the normal use of the Products. During the above mentioned period, the Vendor's obligations shall be limited, at the Vendor's option, to the replacement or repair of the Product recognized as faulty by the Vendor which must be promptly return to the Vendor, carriage paid, together with full details of failure and certified. The repaired or new parts will be delivered free of charge to the place of delivery stated in Article 4.
• The Warranty of the Vendor will apply to the Products which have not been modified by the Buyer or a third party and which have been stored, installed, protected, maintained and used in accordance with the Vendor's specifications and instructions. Such warranty shall not apply in case of normal wear and tear or if the Products have been involved in an accident or subjected to any kind of misuse or detrimental exposure and in case of bad conditions of storage; or 
• if the Products have been submitted to abnormal conditions (mechanical, electrical or thermal) during installation or use; or, 
• if the defectiveness of the Products has resulted from exceeding the maximum values for usage (temperature limit, maximum voltage, etc...) defined by Vendor, from an incorrect choice of application or from a design made by the Buyer.
• Notwithstanding the foregoing, Vendor gives no warranty whatsoever with regard to experimental, developmental or non-qualified Products.
  The foregoing constitutes the whole and sole warranty given by the Vendor and shall be in lieu of any other warranty; in particular, the Vendor does not warrant the suitability or fitness of the Products for a particular purpose, nor that the functions of the Products may be used in any application or combination which the Buyer may choose.